✓ Licensed✓ Insured✓ BondedCorona & nearby cities
Washer Repair in Corona, CA


AV Appliance Repair provides washer repair in Corona, CA and nearby cities. Our technicians fix top-load and front-load washing machines that will not drain, will not spin, leak, make loud noises or stop with an error code. We have been repairing home appliances since 2008, and we are licensed, insured and bonded (Lic. #A45173). The washer service call is $65, and it is waived when you go ahead with the repair.
Common washer problems we fix
- Washer will not drain. Water stays in the drum after the cycle. The cause is usually a clogged drain pump filter, a blocked drain hose or a failed drain pump.
- Washer will not spin or spins slowly. Clothes come out soaking wet. Common causes are a worn drive belt, a bad door lock or lid switch, a failed motor control board, or an unbalanced load sensor.
- Washer is leaking. Water on the floor can come from a torn door seal (boot) on a front-loader, a cracked tub, a loose hose clamp, a leaking pump or a bad water inlet valve.
- Loud banging or grinding. Banging in the spin cycle often points to worn shock absorbers or suspension rods. A grinding or roaring sound usually means the tub bearings are failing.
- Washer will not start or stops mid-cycle. This can be a door lock that will not engage, a bad lid switch, a control board problem or a water level sensor.
- Error codes. Codes such as OE, UE, LE, dE, 5E, 4C or F21 tell us where to start. We run the washer’s own diagnostic test and check the part before we replace anything.
- Musty smell or mold on the door seal. Common on front-load washers. We clean or replace the seal and check the drain system so water does not sit in the drum.
Top-load and front-load washers, all major brands
Our technicians repair washers from LG, Samsung, Whirlpool, Maytag, GE, Kenmore, Amana, Frigidaire and Speed Queen, including stacked washer-dryer units and laundry centers. Newer high-efficiency washers use sensors, electronic controls and direct-drive motors, while older top-loaders use belts and transmissions. We work on both every week, so we know which parts fail most often on each model.
How a washer repair visit works
- You call or book online. Same-day and next-day appointments are usually available, Monday through Friday.
- We diagnose the problem. Our technician tests the washer, reads any error codes and finds the exact part that failed.
- You get the price first. We explain the repair and give you the price before any work begins. No surprises.
- We fix it, often in one visit. We bring the most common washer parts with us. If a part has to be ordered, we tell you when we will be back.
- Warranty. All parts and labor are covered by our warranty.
Washer repair pricing
The washer service call is $65. If you go ahead with the repair, the service call fee is waived and you pay only for parts and labor. See the full price list.
Need your appliance fixed?
Talk to a local technician or pick a time online. Service calls from $65, waived if you go ahead with the repair.
Repair or replace?
Most washers are worth repairing. A washer that is less than 10 to 12 years old usually needs only one part, such as a drain pump, a door lock, a belt or a sensor, and that costs much less than a new machine plus delivery and installation. If a repair does not make sense, for example a cracked outer tub on an old washer, we will tell you honestly.
Simple checks before you call
- Make sure the washer is plugged in and the breaker is on.
- Check that both water faucets behind the washer are fully open.
- On a front-loader, clean the drain pump filter behind the small door at the bottom front (have towels ready).
- Make sure the drain hose is not kinked or pushed too far into the standpipe.
- For a leak, check the hose connections at the back of the washer first.
If the washer still has a problem, call us and our technicians will take care of it.
What our customers say
“Spoke to Robert after sending out estimates. He was at my home an hour later. He quickly diagnosed the washer and got it working while the part is on order. Very happy with AV Appliance and Repair. When I read fast and reliable service, they meant it!”
Stephen C. — Yelp, 9/9/2026
Rated 4.9 out of 5 stars based on over 400 customer reviews on Yelp and Google.
Washer repair near you
We proudly serve Corona and the surrounding area, including Anaheim Hills, Arlington, Chino, Chino Hills, Eastvale, El Cerrito, Home Gardens, Jurupa Valley, La Sierra, Mira Loma, Norco, Ontario, Ontario Ranch, Rancho Cucamonga (91730), Riverside, Temescal Valley, and Yorba Linda. See our full service area.
Washer Repair FAQ
How much does washer repair cost in Corona, CA?
Our washer service call is $65. If you approve the repair, that fee is waived and you only pay for parts and labor.
Do you repair LG and Samsung front-load washers?
Yes. Our technicians repair LG, Samsung, Whirlpool, Maytag, GE and Kenmore washers, both top-load and front-load models.
Why is my washer not draining?
The most common cause is a clogged drain pump filter or drain hose. If cleaning the filter does not help, the drain pump itself may have failed. We can test it and replace it.
Why is my washing machine leaking?
Leaks usually come from the hoses or faucets at the back, a torn door seal on a front-loader, or a leaking pump. Check the hose connections first; if the leak continues, call us.
Why won’t my washer spin?
A washer that will not spin often has a bad lid switch or door lock, a worn drive belt, a failed motor coupler or a drain problem. See our article on a washer not spinning for simple checks.
Is there washing machine repair near me in Corona?
Yes. We are a local washer repair company in Corona, CA, and our technicians serve Norco, Eastvale, Riverside and nearby cities, usually the same day or the next day.
How fast can you come?
Same-day and next-day appointments are usually available. Call us and we will find the earliest time that works for you.
Business hours: Monday through Friday, 9:00am – 5:00pm. Saturday and Sunday closed.
